REFERENCES
  1. MIL-STD-883C method 3015.7, "Military Standard Test Methods and Proc. For Microelectronics", Dept. of Defense, Washington, D. C., U.S.A., 1989.

  2. C. H. Dfaz, T. E. Kopley, and P. J. Marcoux, "Building-in ESD/EOS reliability for Sub-Halfmicron CMOS Processes," IEEE Transactions on Electron Devices, Vol. 43, No. 6, pp. 991-999, June 1996.

  3. Ming-Dou Ker and Tain-Shun Wu, "ESD Protection for Submicron CMOS IC’s—A Tutorial,” CCL Technical Journal, Vol. 42, pp. 10-24, Sept. 1995

  4. T. J. Maloney and N. Khurana, "Transmission Line Plising Techniques for Circuit Modeling of ESD Phenomena, " EOS/ESD Symposium Proceedings, EOS-7, pp. 49-54, 1985.

  5. C. Duvvury, R. N. Rountree, and O. Adams, "Internal chip ESD phenomena beyond the protection circuit," IEEE Trans. on Electron Devices, vol. 35, pp.2133-2139, Dec., 1988.

  6. M. D. Jaffe and P. E. Cottrell, "Electrostatic discharge protection in a 4-Mbit DRAM," EOS/ESD Symp. Proc., 1990, EOS-12, pp.218-223.

  7. C. C. Johnson, T. J. Maloney, and S. Qawami, "Two unusual HBM ESD failure mechanisms on a mature CMOS process," EOS/ESD failure mechanisms on a mature CMOS process," EOS/ESD Symp. Proc., 1993, EOS-15, pp.225-231.

  8. H. Terletzki, W. Nikutta, and W. Reczek, "Influence of the series resistance of on-chip power supply buses on internal device failure after ESD stress," IEEE Trans. on Electron Devices, vol. 40, pp. 2081-2083, Nov., 1993.

  9. C.-N. Wu, M.-D. Ker, et al., "Unexpected ESD damage on internal circuits of sub-μm CMOS technology," Proc. of International Electron Devices and Materials Symposium, 1996, pp.143-146.

  10. EOS/ESD Standard for ESD Sensitivity Testing, EOS/ESD Association, NY., 1993.

  11. C. Cook and S. Daniel, "Characterization of new failure mechanisms arising from power-pin ESD stressing," EOS/ESD Symp. Proc., 1993, EOS-15, pp. 149-156.

  12. M.-D. Ker and S.-C. Liu, "Whole-chip ESD protection design for submicron CMOS VLSI," Proc. of IEEE International Symposium on Circuits and Systems, pp. 1920-1923, 1997.

  13. R. Merrill and E. Issaq, "ESD design methodology,"  EOS/ESD Symp. Proc., 1993, EOS-15, PP. 233-237.

  14. E. R. Worley, et al., "ESD protection for submicron CMOS circuits", US Patent#5440162, 1995.

  15. E. R. Worley, et al., "Sub-micron chip ESD protection schemes which avoid avalanching junctions," EOS/ESD Symp. Proc., 1995, EOS-17, pp. 13-20.

  16. S. Dabral, R. Aslett, and T. Maloney, "Core clamps for low voltage technologies," EOS/ESD Symp. Proc., 1994, EOS-16, pp. 141-149.

  17. W. Miller, "Electrostatic discharge detection and clamp control circuits," U.S. Patent #5255146, 1993.

  18. T. Dungan and E. Coussens, "Electrostatic discharge protection circuit with dynamic triggering," US Patent #5311391, 1994.

  19. G. D. Croft, "ESD protection using a variable voltage supply clamp," EOS/ESD Symp. Proc., 1994, EOS-16, PP. 135-140.

  20. J. T. Watt and A. J. Walker, "A hot-carrier triggered SCR for smart power bus ESD protection," 1995 IEDM Technical Digest, pp. 341-344.

  21. T. Maloney and S. Dabral, "Novel clamp circuits for IC power supply protection," EOS/ESD Symp. Proc., 1995, EOS-17, PP. 1-12.

  22. M.-D Ker, "Area-efficient VDD-to-VSS ESD clamp circuit by using substrate-triggering field-oxide device (STFOD) for whole-chip ESD protection," Proc. of International Symposium on VLSI Technology, Systems, and Applications, pp. 69-73, 1997.

  23. M.-D. Ker, T.-Y. Chen, and C.-Y. Wu, "Design of cost-efficient ESD clamp circuits for the power rails of CMOS ASIC's with the substrate-triggering technique," Proc. of IEEE International ASIC Conference & Exhibits, pp. 287-290, 1997.

  24. M.-D. Ker  and T.-L. Yu, "ESD protection to overcome internal gate-oxide damage on digital-analog interface of mixed-mode CMOS IC's," Proc. of European Symposium on Reliability of Electron Devices, Failure Physics and Analysis, pp.1727-1730, 1996.

  25. M.-D. Ker, C.-Y. Wu, H.-H. Chang, and T.-S. Wu, "Whole-chip ESD protection scheme for CMOS mixed-mode IC's in deep-submicon CMOS technology," Proc. of IEEE Custom Integrated Circuits Conference, pp. 31-34, 1997.